Chevy Equinox, Blazer and Silverado EV: Home Panel Needs
GM sells 32A, 48A and 80A home charging options. The right size depends on what your vehicle can accept and what your panel can carry, and an 80A charger adds a full 100A circuit.
⚠️ Safety first: Work inside a panel or on a 240V circuit should be done by a licensed electrician, with a permit where your area requires one. This page explains the planning, not how to do the wiring.
GM's home charging options
GM Authority's comparison lists a Dual Level cord (12A on 120V, up to 32A on 240V), a 48A / 11.5 kW wall charger (PowerUp), and 80A / 19.2 kW options (PowerUp+ and the GM Energy PowerShift Charger). GM's PowerShift product page describes the 80A charger as hardwired for new Level 2 installs, requiring a professional electrician, and lists it as compatible with the Blazer EV, Equinox EV and Silverado EV among others. Neither source states a breaker size or wire gauge, so the breaker figures below are NEC 125% arithmetic, not GM numbers.
| Charging current | Power at 240V | Breaker at 125% | Load added to a service calculation |
|---|---|---|---|
| 32A (Level 2 cord) | 7.7 kW | 40A | 40A (9,600 VA) |
| 48A (wall charger) | 11.5 kW | 60A | 60A (14,400 VA) |
| 80A (PowerShift / PowerUp+) | 19.2 kW | 100A | 100A (24,000 VA) |
The vehicle sets the real limit
A charger only delivers what the vehicle can accept. GM's page does not list a maximum AC rate per vehicle and says actual rates depend on the battery, the charger output, vehicle settings and temperature, pointing to the owner's manual. Before paying for a 100A circuit, look up your exact model and year's AC charging limit in the owner's manual. If your vehicle cannot use 80A, a 48A or lower charger costs less and loads the panel less.
What this means for a 100A panel
An 80A charger adds a 100A circuit, which is as large as a whole 100A service. It cannot be added to a 100A panel without a service change, or a load management system that the NEC allows under 625.42 and 750.30. A 48A charger on a 60A breaker is more realistic but still large; whether it fits depends on the panel's calculated demand under NEC 220.87 measured demand or the standard calculation. Many owners choose a 32A to 40A setting, which is enough for most overnight charging. See our EV charger electrical requirements and smart load management guide.
Non-GM and NACS vehicles
GM's page says the PowerShift works with any EV with a CCS charge port, though compatibility with non-GM vehicles may vary, and that NACS vehicles need a GM adapter for home charging. Confirm with GM before buying for a different brand.
Vehicle-to-home
GM says the PowerShift can supply up to 9.6 kW back to the home only with the V2H Enablement Kit and a compatible vehicle, both sold separately. That is a separate installation with its own utility and code requirements; ask your utility and electrician.
Sources
- Chevrolet Accessories: GM Energy PowerShift Charger
- GM Authority: GM EV home charging products compared
Frequently Asked Questions
Q: What breaker does an 80A GM PowerShift charger need?
A: GM's page does not state a breaker size. At 125% of 80A the arithmetic gives a 100A breaker; confirm with GM's installation instructions and a licensed electrician.
Q: Can my Chevy EV use 80A charging?
A: It depends on your exact model and year. GM's page does not list a per-vehicle maximum, so check the owner's manual before choosing a charger.
Q: Will a 100A panel handle a 48A GM charger?
A: A 48A charger needs a 60A breaker and adds 60A to a load calculation. Whether it fits depends on your panel's calculated or measured demand; a lower setting or load management may help.