GTE Sylvania Panels: Check for the Zinsco Design
GTE-Sylvania sold panels that our Zinsco guide describes as the same documented design. A label alone is not enough; have the breakers and bus checked.
⚠️ Safety first: Work inside a panel or on a 240V circuit should be done by a licensed electrician, with a permit where your area requires one. This page explains the planning, not how to do the wiring.
What our Zinsco guide covers
Our Zinsco panel guide explains that Zinsco panels, also sold as GTE-Sylvania, have a documented issue in which breaker contacts can weld together under overload so a circuit stays energized even when the breaker is switched off. If your door says GTE-Sylvania, treat it as potentially the same design until a licensed electrician says otherwise.
What to look for
Do not remove the panel cover yourself. A licensed electrician can check the brand markings, breaker types and their fit on the bus, and signs of overheating. We have not verified claims about a separate safe Sylvania design, so do not assume a Sylvania label means safe or unsafe.
Next steps
See panel inspection and replacement cost. Ask your insurer what documentation it needs.
Sources
Frequently Asked Questions
Q: Is a GTE-Sylvania panel the same as Zinsco?
A: Our Zinsco guide says Zinsco panels were also sold as GTE-Sylvania. Have an electrician confirm the design in your panel.
Q: Can I check the breakers myself?
A: No. Leave the panel cover on and ask a licensed electrician.
Q: Do I have to replace it?
A: Many electricians recommend replacement of Zinsco-type panels. Get an inspection and a written recommendation.