Pushmatic (Bulldog) Panels: Keep, Repair or Replace?
Pushmatic panels use rectangular push-button breakers made by Bulldog and later ITE. They are old, so the question is condition and parts, not the brand label alone.
⚠️ Safety first: Work inside a panel or on a 240V circuit should be done by a licensed electrician, with a permit where your area requires one. This page explains the planning, not how to do the wiring.
How to identify one
Pushmatic breakers are push-button units rather than toggles, with a flag or window showing ON and OFF. The panels date from mid-century decades and are made by Bulldog Electric Products, later ITE. Many such panels are now very old, so electricians commonly look for heat damage, stuck mechanisms and missing parts.
Questions for an inspection
- Do all breakers operate smoothly and trip when tested?
- Are replacement breakers available for the exact type, or only used units?
- Is there room for the loads you plan, such as an EV charger or heat pump?
- Does your insurer have a position on the panel?
We have not verified claims you may see online about specific failure rates, so rely on a licensed electrician's inspection.
Cost
Costs vary widely by home and location, so this page gives no price. See our panel replacement cost guide and get written quotes from licensed electricians.
Sources
Frequently Asked Questions
Q: How do I recognize a Pushmatic panel?
A: Look for rectangular push-button breakers with an on/off flag instead of toggle handles, and Bulldog or ITE markings.
Q: Can I add breakers to a Pushmatic panel?
A: It depends on available compatible breakers and spaces. Ask an electrician to check.
Q: Do I need to replace it?
A: Not automatically. Inspection findings, parts availability and your plans decide.