Main ⚡ Calculator 📖 Blog & Guides ℹ️ About 📞 Contact All Articles 🚗 100A Panel + EV Charger 💰 Panel Upgrade Costs 2026 🌀 Heat Pump Electrical Guide 🍳 Induction Range Checklist 🔧 DIY EV Charger — The Truth 🤖 Smart Load Management Check Popular Products →
EV Charging

Emporia PowerSmart on a 100-Amp Panel: How It Works

📅 Updated October 2026⚡ HomePanelCheck Editorial

Emporia PowerSmart uses a Vue energy monitor on your main service lines to lower an Emporia EV charger's output when the rest of the house needs power. That can let a 100A panel carry a charger without a service upgrade, if your inspector accepts the setup.

⚠️ Safety first: Work inside a panel or on a 240V circuit should be done by a licensed electrician, with a permit where your area requires one. This page explains the planning, not how to do the wiring.

⚡ Emporia PowerSmart on a 100A panel: simulator
...

This simulator uses an example installer limit of 80% of the panel rating. Actual limits are set during installation. Emporia checks capacity about once a minute.

How Emporia PowerSmart works

According to Emporia, the Vue energy monitor tracks your home's total electrical use and PowerSmart checks the available capacity every minute. It lowers the EV charging rate as the home nears its electrical limit, and raises it again when usage drops. If several chargers on the same panel have equal ratings, they share the available power equally.

What you need

  • A Vue 3 or Vue 2 energy monitor with 200A CT sensors on the main service lines. Emporia says one Vue is needed per panel, and Vue Utility Connect and Gen 1 are not supported.
  • An Emporia Pro Level 2 charger, which includes PowerSmart, or an Emporia Classic charger with a paid software upgrade.
  • A stable internet connection.
  • At least 6A available per charger.

Emporia lists $200 for a monitor plus software upgrade (for Classic owners) and $125 for the software upgrade alone, and cites about $600 for a complete system. Prices change, so check Emporia's site. See also our Popular Products page for the Vue energy monitor.

If your internet goes down

Emporia says the charger falls back to the preset "Allocated Charging Amps" limit chosen during setup, and dynamic control resumes when the connection returns. Choose that fallback value with your electrician so it is safe for your panel.

Does it avoid a panel upgrade?

Emporia says PowerSmart can help you add an EV charger without a main panel upgrade, and states that it meets the NEC energy management system requirements (625.42 and 750.30). Under NEC 625.42(A), where an energy management system provides the load management, the service or feeder calculation can use the maximum load the system permits. Local inspectors and utilities decide what they accept, so confirm before you buy. Emporia itself recommends a licensed electrician for an Article 220 panel capacity evaluation.

Installing CT clamps means working inside the panel near the main service conductors. That is electrician work.

Sources

Frequently Asked Questions

Q: Does the Emporia Pro include PowerSmart?
A: According to Emporia, yes. The Pro includes PowerSmart, while the Classic charger needs a paid software upgrade. You still need a Vue 3 or Vue 2 monitor with 200A main sensors.

Q: What happens to Emporia PowerSmart when the internet drops?
A: Emporia says the charger falls back to its preset Allocated Charging Amps limit from setup until the connection returns.

Q: Will my inspector accept Emporia PowerSmart?
A: Emporia states it meets the NEC energy management system requirements, but acceptance is a local decision. Ask your inspector before you rely on it to skip a panel upgrade.

⚡
Rahul T. — Founder & Editor, HomePanelCheck.com
Rahul researches home electrification, NEC load calculation methodology, and EV charging infrastructure to help homeowners understand their electrical panel options in plain English. This page is based on manufacturer documentation and NEC sources linked in the text. It is not a substitute for a licensed electrician's assessment of your specific home. Questions or corrections? contact@homepanelcheck.com
🍪 We use cookies for analytics and advertising to keep this tool free. Privacy Policy